Key Point for the design of dryer machine for oil palm fiber

06-12-2023 Hits：

Before to design one reasonable Oil Palm Fiber dryer machine, firstly we have to be clear on the features of wet oil palm fiber.

Oil Palm Fiber is extracted from oil palm, and it is thin and long fiber boimass material. The oil palm fiber has the features as follows:

01. It is inner water which needs enough time to heat and dry it sufficiently;

02. It is very light. The loose bulk density of wet oil palm fiber is only about 175 kg per cubic meter. The volume of 10 tons is about 57 m3.

Key Points for the design of dryer machine for oil palm fiber :

01. Oil Palm Fiber should be made into smaller pieces so that have better flow ability and with more contact area with hot air.

02. The dryer should can supply enough drying time;

03. The dryer should can supply enough drying space and water evaporation space ;

04. Oil Palm Fiber should can pass through the dryer cylinder smoothly in time, especially to avoid some of it is stuck at the inlet end of the dryer.

05. The inner design of the dryer should be reasonable which can help to disperse the oil palm fiber sufficiently, then make sure there is enough contact area between the hot air and oil palm fiber, thus the oil palm fiber can be heated by the hot air sufficiently, thus can have better heat exchanging efficiency.

dryer machine for oil palm fiber