Rotary Drum Dryer for Drying Wood Shavings, Sawdust and Wood Chips

Sunco Machinery design one new type rotary drum dryer specially for drying biomass material such as wood shavings, sawdust, wood chips, etc, and within one time to reduce the moisture content to be less than 20% or as need.

Sunco Machinery has been worked in the field of drying wood chips, sawdust, wood shavings, etc since the year 2001. From then on, we have seen many different kinds of drying methods with varying degrees of success. Our past experience has proved that the most economic and efficient method for drying wood shavings is to use Rotary Drum Dryer in large quantity. 

Wood Shavings Rotary Drum Dryer by Sunco Machinery has the features as follows:

>>> More economical to operate when fuel costs are taken into account.

>>> Big drying intensity. As wood shavings are high dispersion inside the flue gas, all superficial area of the wood chips (or wood shavings) are the effective drying area.

>>> Quick Drying Speed, it is continuous drying process, and within about 20-25 minutes can get the dried wood shavings, wood chips and sawdust.

>>> Compact Structure, Less occupied area, easy installation, low maintenance cost.

>>> Large processing Capacity up to 10 tons per hour, High thermal efficiency up to 80%. 

>>> Even Quality Wood Shavings:  Low breakage ratio, little smell of flue gas, environment friendly.

Rotary wood shavings dryer systemis one whole unit, it mainly includes the hot air furnace system, wet material feeding system, rotary dryer system, induced fan system, dust removal system, electric control system, etc.

For one set of successful wood shavings drying line, need to find one balance point between the input heat quantity, wet wood shavings feeding quantity and the drying time.  Under this balance point, wood shavings dryer machine can have the best drying performance with the minimum energy consumption.  

For rotary wood shavings dryer machine, usually the owner have the waste wood such as Root, bark, etc， and it can be used to as fuel for the hot air furnace, and thus to reduce the fuel consumption cost at the most, so as to can have more economic benefit.