Small Wood Shavings Dryer With Capacity 1 ton per hour

Input capacity 1 ton per hour small wood shavings dryer machine by Sunco Machinery is hot sale for the small scale wood shavings production project, and the related invest cost is less, and the work performance is good.

Small wood shavings dryer is specially designed for drying biomass material such as wood shaving, wood chips, sawdust, hay, oil palm fiber, etc. For such types biomass materials, they have the similar features of:

>>> It is inner water which needs enough drying time to gradually evaporate out the water.

>>> It is light material, and its related volume is bigger.

>>> Under high temperature drying process, if the inner design of related hot air furnace and rotary wood shavings dryer is not reasonable, and the wood shavings can not pass through the dryer drum smoothly, and to be stuck inside the dryer cylinder,  then the temperature of wood shavings will rise quickly, thus might cause fire.

Small wood shavings dryer system has the advantages of low invest cost, high output capacity, high heat efficiency, environment friendly, low breakge ratio of wood shavings, easy operation and maintenance, quick drying speed, etc.

Introduction of Small wood shavings dryer system with input capacity 1 ton per hour:

>>> It is suggested to use waste wood fired hot air furnace to creat hot flue gas for the wood shavings drying line, so as to save the related fuel consumption, and creat more economic benefit accordingly.

>>> Input Belt Conveyor feeds wet wood shavings into rotary wood shavings dryer through rotary airlock valve which is used to avoid coal air into the dryer cylinder.

>>> In the rotary small wood shavings drier, wet wood shavings is heated by both of high temperature air and hot dryer body, when the dryer body is rotating, the inner lifting plates shovels the wood shavings up and down, and moves to the outlet end of the dryers. During this moving process, the water in the wood shavings gradually is evaporated out, and then under the action of induced draft fan, the water vapor is sucked out of the dryer machine. 

Finally the dried wood shavings comes out of the dryer durm through rotary airlock valve, and then to be taken away by output belt conveyor.

>>> Cyclone separator is to collect the wood powder, and keep the wood shavings drying site clean.

>>> Induced draft fan has 2 functions: one is to suck the hot flue gas into the shavings dryer, the other is to such out the exhaust air and water vapor from the driers.

>>> Electric control cabient is to control the whole wood shavings drying line.

For the small wood shavings dryer machine, how to control and adjust the output moisture content of the dried wood shavings ? 

We can reduce the increase the drying time, so that can higher moisture content or lower moisture content accordingly. For the rotary wood shavings dryer, there is one frequency conversion motor for the dryer mainframe. By adjusting the frequency conversion motor, can make the dryer drum rotates under a high speed or a low speed.  

The higher the dryer rotation speed, the less the wood shavings drying time; The lower the dryer rotation speed, the longer the wood shavings drying time.

For detail offer of small wood shavings dryer machine with input capacity 1 ton per hour, please feel free to contact Sunco Machinery at your convenience.