New Type Wood Shavings Dryer Machine

For the old design wood shavings dryer machine, as its inner structure design is not reasonable, usually its capacity is low, but meantime the energy consumption is rather high. In such situation, it significantly will influence the production profit of the clients.

Combining the past years' successful experience in the drying field of biomass material such as wood shavings, wood chips, sawdust, etc, Sunco Machinery have developed one new type wood shavings dryer machine. Many client cases have proved it.

Wood Shavings is made of wet wood logs, and its features is as follows :

>>> High humidity, up to about 50-60%.

>>> Inner water, needs to be evaporated out gradually.

>>> Light material, its loose bulk density is only about 50kg per cubic meter.

>>> As the wood shavings is rather thin, thus it is easy to be broken into smaller pieces. 

According to the features mentioned as above, Sunco Machinery have made many changes and optimization on the new type wood shavings dryer. 

>>> Especially for waste wood fired furnace, optimizeD and improved the burning efficiency and reduce the heat loss, thus can help to save certain quantity of waste wood accordingly.

>>> Improved the inner welded lifting plates' angle and length, so that it can disperse the wet wood shavings sufficiently and gently, and reduce the breakage ratio as much as possible.

>>> Added hear insulation layer on the surface of the dryer body, and reduce the heat loss as much as possible.

>>> Advanced transimission mode, less power needed;

>>> According to the volume of wood shavings and moisture content reduction level, to design and supply the matched size of the dryer machine, so that can supply the matched drying space and water evaporation space.

>>> Adopted frequency conversion motor for the induced fan, can adjust its rotation speed and air low quantity smoothly, and save power.

>>> In front of the dryers, added one high temperature resistant induced fan, not only let the high temperature air to contact the wood shavings strongly, but also blow the wood shavings into the dryer smoothly.

For detail of wood shavings dryer machine, you are welcome to contact and visit Sunco Machinery at your convenience. We will revert back to you in detail within 24 hours once receive your inquiry.