Biomass drying equipment

Biomass drying equipment mainly are used for drying wood chips, wood shavings, sawdust, etc, and reduce its moisture content to the targeted moisture content for next step usage, such as: biomass pellet, animal beddings, compressed wood plate, fuel, etc.

Sunco Machinery can design and supply wood shavings dryer, wood chips dryer, sawdust dryer as the clients' actual need. The working principle of them is similar, but their design is some different according to the features of wood shavings, sawdust and wood chips.

For drying wood shavings, as the wood shavings is rather thin and light, the dryer machine should can supply enough drying space and water evaporation space, and need to make sure that the wood shavings can pass through the dryer drum smoothly.  What is more, the air volume should not be too big and strong, and avoid to suck out the wood shavings in a very short time, without to be dried sufficiently.

For drying wood chips, as the wood chips is more thick and heavy, also it is inner water which is difficult to be evaporated into vapor. Thus, the wood chips dryer machine should can supply enough drying time, and its inner structure should can disperse the wood chips sufficiently to increase the heat contact area with hot air. Sunco Machinery triple pass wood chips ideally can meet this demand.

For drying sawdust, as the sawdust powder is fine with better flow ability, sunco machinery 7 inner chambers rotary sawdust dryer is rather suitable, not only it can supply enough drying space and drying time, but also its special inner structure help to disperse the sawdust sufficiently so as with more heat contact area with hot air, then have higher heat exchanging efficiency and drying ability.

If you in need of biomass drying equipment, please feel free to contact us and supply the following necessary information:

01. Do you need to dry wood shavings, sawdust, or wood chips ?

02. What is the usual moisture content of the wet biomass material ?

03. How many tons wet biomass material do you plan to dry per hour ?

04. After being dried, what is the needed output moisture content (%）of the dry product ?

05. What kind of fuel will you prefer to use such as coal, waste wood, biomass pellet, diesel, or natural gas, etc ?

Warm welcome you come to visit Sunco Machinery to negotating and discussing the related biomass drying equipment face to face.