Australia Mr.Leigh visit Sunco Machinery for sawdust drying machine

Australia Mr.Leigh come to visit Sunco Machinery to negotiate the pruchase of sawdust drying machine on May 16th. His friend Mr.Tony, Electric Engineer, will together come to visit us.

Australia clients need to use the dry sawdust to produce biomass pellets. They need one whole process from the wood crushing, wood sawdust drying, pelletize, packing, etc.

Their Material are wood waste such as sawdust, small wood chips, etc, and in the rainy season, its initial moisture content is up to about 40%-50%, and in the dry season, the moisture content of wet material is about 30%-40%.

The wet material is stil too wet to be used for producing boimass pellet, and thus need to use sawdust drying machine to heat and dry it, and reduce its moisture content to be less than 15% in advance.

Sawdust drying machine also is well known as rotary sawdsut dryer, which is ideal for drying biomass material such as sawdust, wood shavings, wood chips, hay, etc.  The dryer adopts high temperature drying mode within short drying time, and it is continuous drying process, usually within about 20-25 minutes, can get the dried material.

If you are in need of sawdust drying machine, some necessary information is needed as follows:

■ What is the initial moisture content (%) of the wet material ?

■ What is the needed output moisture content (%) of the dried material ?

■ How many tons wet material do you need to dry per hour ?

■ What kind of fuel will you prefer to use such as coal, waste wood, diesel, or natural gas, etc ?