Wood Shavings Dryer was installed well in Greece

Wood Shavings Dryer Machine for Greece Customers was installed well in December, 2015, and this wood shaving drying machine's capacity is 1200 kg per hour, and it runs very smoothly.

Wet Wood shavings is sent into the dryer by input belt conveyor.

Wood shavings is being dried inside the dryer drum.

Dried wood shavings is taken away by the output belt conveyor

1- Requirements of Wood Shavings Dryer for Greece client:

Application: Pine Wood Shavings , Wood Chips ;

Wood Shavings Moiture Content before drying: about 40%-45% ;

Wood Shavings Moiture Content after the drying process:  8%-10% ;

Heat Sourse: Waste Wood, Coal ;

Processing Capacity: 1.2 ton per hour

2- Equipment List of Wood Shaivings Dryer System:

Feeding System: B400X8M Belt Conveyor 1 set, Feeder 1 set ;

Wood Shavings Drying System: Dia.1.1m x L10m  wood shavings drum dryer 1 set ;

Combustion System: Hot Air Furnace 1 set ;

Induced Draft Fan: Model 5C, 1 set ;

Belt Coneyor for Dry Wood Shavings: 1 set ;

Electric Control Cabinet: 1 set;

Total Power Consumption:  14.4kw       

Wood Shavings dryer is to use high temperature hot air to heat and dry wet material strongly, quickly and continuously, and the hot air temperature near the dryer inlet end is up to about 300-400 centigrades, and the drying time is about 20-25 minutes, after being dried, the moisture content of the dried wood shavings can be reduced to be less than 15% or as need.

For wood shavings dryer plant, the cheap fuel is one key factor, and usually the clients can use waste wood as fuel, and it is one good choice.