drying machine
Welcome to Sunco Machinery  |  Site Map  |  Contact us

NEWS CENTER

You are here: Home > News & Events >> Industry News

Work Flow of Wood Chips Drier Machine

Time:2018年11月30日      Hits:

Wood chips drier machine is mainly drying wood chip equipment. Wood chips dryer by Sunco Machinery has the new features of quick drying speed, less energy consumption, low invest cost, etc, and it can reduce the wood chip moisture content from 40-55% to below 15% according to the users' requirments.

Wood Chips Drier Machine, wood chip dryer, wood chip drying machine

The dry wood chips can be used for wood pellets and briquettes factory.

Then, What is the Work Flow of Wood Chips Drier Machine by Sunco Machinery ?

Wood Chips Drier Machine, wood chip dryer, wood chip drying machine

--- Fuel feeder sends dry wood chips into Biomass Burner.

--- Biomass Burner is used to burn the dry wood chips, and generate high temperature air for the drying system.

--- Ash Settling Chamber is used to collect the ash generated in the burning process.

--- Inlet Belt Conveyor sends wet wood chips into feeder.

--- Feeder sends wet wood chips into the Special Designed Rotary Dryer for wood chips.

Wood Chips Drier Machine, wood chip dryer, wood chip drying machine

--- The Special Designed Rotary Dryer is designed according to the features of the wet wood chips. Rotary dryer not only supply the drying space, but also its special inner structure disperse the wet wood chips and increase the heat contact area between the high temperature air and wet wood chips as much as possible, and then the dryer can have better heat exchanging efficiency, and the water is evaporated into water vapor, and finally the moisture content of wet wood chips is reduced to be about 10% .

--- Draft Fan makes the high temperature air into the dryer, and make the exhaust air and water vapor out of the dryer, and then goes into the cyclone separator.

--- Inside the cyclone separator, the fine dust is separated from the exhaust air, and falls down to the bottom of cyclone separator, then through the wind closing device and falls onto the outlet belt conveyor. The exhaust air and water vapor leaves the cyclone separator from the top, and then pass through the draft fan and goes into water dedusting tower.

--- The water dedusting tower work together with the recycling water pool, and get rid of the rest dust of the exhaust air, and finally the exhaust air goes into atmosphere.

--- Outlet Belt Conveyor takes the dry wood chips to the product storage area.

--- Electric Control Panel is used to control all the above machines.

If you are in need of Wood Chips Drier machine, please supply more informations as follows:

01. What is the usual size of your wood chips ?

02. Please send us some photos of your wood chips for reference.

03. What is the bulk density (kg per cubic meter) of your wet wood chips ?

04. What is the initial moisture content of your wet wood chips ?

05. What is the output moisture content of the dry wood chips needed ?

06. How many tons wet wood chips do you need to dry per hour ?

07. What kind of fuel will you prefer to use such as coal, waste wood, wood chips, natural gas, diesel, etc ?

For more detail of Wood Chips Drier machine, please contact Sunco Machinery:

--- Email: suncomachinery@hotmail.com

--- Tel./WhatsApp: +86-15838214261

Inquiry
Note: Please feel free to give your inquiry in the form below. We will reply you with details within 24 hours.
Topic: *
Company:
Name: *
Tel: *
E-mail: *
Message: